Last Updated: November 6, 2026
Quick Summary
The best llaplates alternatives for custom designs are TAPORT's customised number plate holders, priced from £19.99 for a single holder to £29.99 for a twin pack. All three options use UV digital printing sealed under epoxy resin gel doming, fit standard-size plates and need no drilling.
- The twin pack costs £29.99 and business use is permitted.
- Order more than ten pieces and message TAPORT for a discount.
- Artwork should match the 20mm x 511mm print strip aspect ratio.
- Mounting takes one to three minutes with included fixings and manual.
- Avoid fine detail and thin script below a few millimetres tall.
Table of Contents
- What Llaplates Alternatives Actually Need to Deliver
- How We Evaluated These Custom Design Options
- Quick Comparison: Custom Number Plate Holder Options
- 1. TAPORT Single Customised Number Plate Holder: Best for Personalised Gifts
- 2. TAPORT Twin Pack Customised Holders: Best for Car Dealers and Fleets
- 3. TAPORT Custom Text and Photo Logo Holder: Best for Business Branding
- Custom Number Plate Holder Design Ideas That Work
- Custom Number Plate Holder Printing: What to Expect
- How to Choose a Custom Number Plate Holder
- Ordering Your Custom Number Plate Holder
- Frequently Asked Questions
What Llaplates Alternatives Actually Need to Deliver
If you have been searching for best llaplates alternatives for custom designs, you have probably noticed the results make little sense. Half of them are design software, the other half are print-on-demand shops, and almost none sell what you actually want: a custom number plate holder for your car. At TAPORT, we print customised plate holders, so we know what a good alternative has to do.
A custom number plate holder is a frame that surrounds your registration plate and carries printed text, graphics or a logo. The best llaplates alternatives for custom designs get three things right: print durability, fit, and design support. Get any of those wrong and you have wasted your money on something that fades, rattles or will not sit flush.
Below, we break down the options that actually deliver, with real prices and honest trade-offs.
How We Evaluated These Custom Design Options
The holders we recommend use UV digital printing sealed under epoxy resin gel doming, which provides weather, temperature and vibration resistance. Fixings and a manual are included, mounting takes one to three minutes, and no drilling is needed. The frame suits curved and round-edge plates.
Quick Comparison: Custom Number Plate Holder Options
The table below compares print method, design support and price for the customised holders. All prices are in GBP.
| Option | Price | Best For | Design Help | Accepted Files | Commercial Use | Finish |
|---|---|---|---|---|---|---|
| Single customised holder | £19.99 | Personalised gifts | Send text or PDF; we design it | PDF, PNG, JPG, SVG | Personal use; business use on request | UV print, gel domed |
| Twin pack customised holders | £29.99 | Dealers and fleets | Send text or PDF; we design it | PDF, PNG, JPG, SVG | Business use permitted | UV print, gel domed |
| Custom text and photo logo holder | £25.99 | Business branding | Preview before manufacture | PDF, PNG, JPG, SVG, AI | Business use permitted | Matt or gloss gel |
Price
All three fit any car with a standard-size plate (roughly 520mm x 111mm), come with fixings and a manual, and need no drilling.
When you supply artwork, you confirm you own or have permission to use it.
Artwork should be prepared at the aspect ratio of the 20mm x 511mm print strip. If your file is built for a square or a full page, expect cropping.
1. TAPORT Single Customised Number Plate Holder: Best for Personalised Gifts
Our single holder is suitable for personalised gifts. You can send your idea at checkout or email a PDF, and we can print any text, graphic, design or font that fits the 20mm x 511mm strip. The frame is MOT approved, weather, temperature and vibration resistant, and allows easy plate swapping.
Pros: Low entry price, no drilling, works on curved plates. Cons: One holder per order, so a two-car gift needs two orders. Best for: Gifts and private owners. Skip if: you need ten or more.
You can order the customised number plate holder directly.
2. TAPORT Twin Pack Customised Holders: Best for Car Dealers and Fleets
The twin pack is £29.99 and includes two printed holders. Order more than ten pieces and message us for a discount.
Pros: Cheaper per unit, consistent branding across a fleet. Cons: Fixed pair, so odd numbers mean buying extra singles. Best for: Dealers, garages and small fleets. Skip if: you only need one.
Browse the twin pack customised holders for trade pricing.
3. TAPORT Custom Text and Photo Logo Holder: Best for Business Branding
The black surround takes a photo, logo or text strip. You can choose a matt finish or gloss with gel on top. The print area is 20mm x 513mm.
Pros: Two finish options, suitable for business branding. Cons: Costs more than the plain single holder. Best for: Small businesses and promotional use.
See the custom text and photo holder to start a design.
Custom Number Plate Holder Design Ideas That Work
Simple, high-contrast designs survive best. A single line of bold text in a colour opposite your car paint reads clearly from a distance: grey car, blue holder; black car, pink holder. Themed designs also work well, and a Union Jack flag holder suits a British car or a gift. Avoid fine detail and thin script below a few millimetres tall, because it blurs at plate scale. Business logos should be reduced to one mark plus a short line of text, not a full letterhead.
Custom Number Plate Holder Printing: What to Expect
The print mechanism. The holders use UV digital printing with epoxy resin gel doming, which provides weather, temperature and vibration resistance. If you want a premium printed look, a carbon 3D premium holder shows how a textured finish reads in practice.
File formats and export quality. The print strip is 20mm x 511mm (or 20mm x 513mm on the photo logo holder), so artwork should be prepared at that aspect ratio.
Artwork rights. When you supply artwork, you confirm you own it or have permission to use it.
Production readiness checklist. Before you order, confirm: the aspect ratio matches the print strip; text is legible at plate scale (avoid thin script below a few millimetres tall); colours are high-contrast against the frame; and you have the right to print the artwork if it will be used on a business vehicle.
How to Choose a Custom Number Plate Holder
Work through this checklist before you order:
- Confirm your plate is standard size, roughly 520mm x 111mm
- Decide single, twin pack or bulk based on how many cars you have
- Pick a colour that contrasts with your paint
- Prepare artwork to the print strip size, or ask for design help
- Check the frame suits curved or round-edge plates
- Confirm fixings and a manual are included
- Check delivery timing against your event date
Watch out: ordering artwork at the wrong aspect ratio can cause problems. A logo built for a square will not fit a 20mm strip without cropping.
Ordering Your Custom Number Plate Holder
Ordering is straightforward: choose your holder and send your text or PDF at checkout. Mounting takes one to three minutes with the included fixings and manual, and no drilling is needed. If you are not confident with design files, tell us your idea and we will design it for you.
Choosing a custom plate holder should not mean wading through design software results that have nothing to do with your car. TAPORT prints UV-cured, gel-domed holders that resist weather, temperature and vibration, with fixings and a manual in every box. Start with a single holder for a gift, a twin pack for the forecourt, or a logo design with a preview before manufacture. Get started with TAPORT and put your name on the plate.
Frequently Asked Questions
What are the best alternatives to Llaplates for custom designs?
If you want a custom number plate holder, the TAPORT range offers customisable options. The single customised holder costs £19.99, the twin pack is £29.99, and the black custom text and photo logo holder is £25.99. All three accept any text, graphic, design or font that fits within 20mm by 511mm, and each is MOT approved and supplied with fixings and a manual.
Can I upload my own design for a number plate holder?
Yes. TAPORT accepts your idea at checkout or by email as a PDF file. Your graphic needs to fit into a 20mm by 511mm strip. If you are not confident with design software, the team can design it for you and will show you a preview before manufacture, so you can approve the layout before anything is printed. Matt and gloss gel finishes are both available on the photo logo holder.
What printing methods are used for custom number plate holders?
The custom number plate holder printing at TAPORT uses UV digital printing with epoxy resin gel doming on top. That combination is what makes the holder resistant to weather, temperature changes and vibration, which matters on a daily commute.
How do I choose a durable custom number plate holder?
Check four things: whether it fits a standard plate size of 111mm by 520mm, whether it is MOT approved, whether the print is sealed under a protective dome, and whether fixings and instructions are included. All TAPORT holders meet those points, mount in one to three minutes without drilling, and suit curved or round-edge bumpers as well as flat ones.
Are custom number plate holders easy to swap between vehicles?
Yes. The holders are built for quick plate changes, which is why they suit caravan and trailer owners as well as private cars. Fixings are included and no drilling is needed, so mounting takes one to three minutes.
